summary:

The high borosilicate glass heating substrate is mainly composed of high borosilicate glass, multilayer inorganic color crystal glass glaze coating, inorganic nonmetal far-infrared graphite resistance film and high humidity resistant insulating mica plate. The high borosilicate glass heating substrate is composed of inorganic ceramics, glass negative ion materials, carbon and other non-metallic conductive materials and infrared radiation materials, which are combined on the outer surface of high borosilicate glass through printing, high-temperature sintering and other processes, and is permanently made into a whole with the glass plate to form an inorganic non-metallic far-infrared graphite resistance film. After the substrate is electrified and heated, it emits infrared heat to form a thermal radiation source for heating.

characteristic:

1. It consists of inorganic ceramics, glass and negative ions. Metal conductive powder. Made of carbon powder and other materials, multi-layer inorganic composite structure, good water resistance. No open flame, no oxidation, even temperature and good impact resistance; The material is environment-friendly, no peculiar smell, no noise and no harmful gas emission during production and use;
   

   
   

2. The heating body is made of carbon, glass and ceramics rich in far infrared rays. The infrared radiation is strong and beneficial to human health (the main wavelength range of far infrared is 8-15 meters, which is called "health light" and "life light" in medical circles);
   

   
   

3. Using "surface" radiation heating mode, full area heating, low power density, low film temperature, the product can be designed in high and low temperature area or multi temperature area, high and low temperature difference can reach 50c. As glass is a poor conductor of heat, it has incomparable characteristics compared with other carriers. High and low temperature zone does not cross temperature and interfere with each other. The scientific arrangement of temperature zone is an innovation of this product;
   

   
   

4. Good cold and hot shock resistance. The glass heating plate works under 1.15 times of rated input power until stable state is established. Pour 1 liter of water (water temperature 15C, soil temperature 5C) into a pipe with a diameter of 5mm, and then pour it directly to the center of the positive surface of the glass heating plate at a speed of about 10mls, and the glass plate will not be broken or cracked; The high borosilicate glass substrate can also be heated to 150-200c. The 5C cold water can be directly reversed to the center of the plate body, and the plate body will not crack after three times of impact;
   

   
   

5. Various shapes and patterns can be made according to the size of the workpiece. The surface of the component has the effect of glazed glass, rich and diverse colors, full of personality, and can't see color;
   

   
   

6. The heater with negative temperature coefficient has no potential safety hazard caused by impulse current;
   

   
   

7. The heating base plate can be supported by wooden frame, plastic bracket and various metal brackets. But it is necessary to reserve a certain expansion space, upper and lower circulation cooling channels and necessary shock absorption and shockproof measures. In case of damage to the product caused by mechanical impact during use and transportation;
   

   
   

8. The "a" angle and edge of the heating substrate are easy to break. The angle should be designed as safe as possible to avoid harm to human body;
   

   
   

9. In order to ensure safety, a high temperature resistance coating is pasted on the back (the surface of inorganic nonmetal far infrared graphite resistance film). Mica board resistant to insulation and leakage; The product must be equipped with reliable fuse and temperature protection device. In order to prevent the danger caused by the failure caused by abnormal crystal production.
   

   
   

Application fields:

1. Food service equipment, food insulation board and incubator;
   

   
   

2. Building heating, interior decoration, color crystal ceiling integrated wall top;
   

   
   

3. Medical, health care and far infrared radiators;
   

   
   

4. Light wave room, spectrum room, foot warming board, thermal insulation writing board;
   

   
   

5. Agriculture, forestry, animal husbandry and sideline fishery, fruit and vegetable greenhouse, street lamp and demisting glass;
   

   
   

6. Incense burner, electric cake pan heating plate;
   

   
   

7. Towel drying rack, ultra-thin electric heater, anti fog window and anti frost window.