Product
Address: 1013 Hyatt tower, No.8, Yangxia Avenue, Xinqiao community, Xinqiao street, Bao'an District, Shenzhen City, Guangdong Province, China
Tel：86-0755-27260355
Fax：86-0755-27260308
Business hotline: Mr. Zhang13392839815 / 18922803896
Fever Tablet
Polyester film alloy heating plate点击下载
Introduction
Polyester film electrothermal gold sheet is a special alloy sheet. The thickness of the sheet is up to 0.025mm. The resistance temperature coefficient is small and stable, so the power is stable. The resistance value that determines the power can be adjusted and controlled by the thickness, width and geometry of the sheet, And it is sandwiched between two layers of polyester film to form the required sheet electric heating element.
characteristic:
-
It is suitable for all kinds of special-shaped heating places where bending heating is needed; Good flexibility, can ring package. The bending device can be installed on heating bodies of different shapes, and the components are easy to use;
-
The heat is uniform, the element is flat, the effective coverage of the heat receiver is high (up to 90%), so the heat is uniform, the heat loss is small, the efficiency is good, and the heat conversion rate is as high as 98%;
-
Good safety, large heat dissipation (heat transfer) area of components, no open fire during operation (working temperature ≤ 80C). The carrier and packaging materials are made of flame retardant materials;
-
Corrosion resistance and lake protection. Because the alloy sheet is covered with temperature resistant insulating material, it can be protected from Lake and corrosion;
-
It is easy to install. The components can be bonded in a specific place or clamped with a clamp. Hook, button. It can be fixed by small holes and other ways, and can be directly pasted with the required heating parts;
-
The electric heating alloy sheet has a larger effective heat conduction area than the wire wound heating sheet. There is a smaller temperature gradient between the alloy sheet and the heat sink. The heater keeps a lower temperature, which can extend the life of the accessories;
-
Precise customization of shape and size, unlimited shape of alloy sheet, saving space. The weight is only 0.035 ~ 0.047 g / cm2 and the thickness is only 0.09 ~ 0.25 mm.
